J/22
Our J/22 sails are designed for easy trimming and maximum performance in all wind and wave conditions.
All of our sails are made using the best materials on the market and are designed with our exclusive AccuCut 3D* and Azure Project which allows us to constantly monitor and change our own designs and tuning guides. The experts at UK sailmakers can ensure that our One-Design sails will meet or exceed your expectations.
Click the image above to see a video about our latest J/22 sails designs.
Designs are constantly updated. New materials, hours of on-the-water testing, and race results are all contributing factors. The J/22 Tuning guide will help you precisely tune the rig and trim the sails, freeing up the crew to concentrate on tactics and speed.
UK Sailmakers J/22 inventory is the AP Mainsail, two Jibs (Light & Medium), and an AP Running Spinnaker.
AP MAINSAIL
The UK Texas Mainsail has a shorter leech. This allows for more roach, providing extra sail area higher up. This sail was designed for all conditions and is compatible with both the flat and angled mast step.
Cut: Cross-cut panels with elliptical radial clew reinforcement, radial patches for clew and head allowing longer durability, Azure design software.
Material: Dimension Polyant 230HTP High Aspect Dacron.
Designed by Pedro Gianotti of UK Texas.
LIGHT & MEDIUM JIBS
LIGHT JIB
We designed the Light Jib for prevailing winds less than 12 knots. Is made of 200FHT Dacron
MEDIUM JIB
The Medium Jib is made of 205 Square Dacron. It’s designed for the places where the average breeze is higher than 14kts. The shape is about 10% flattener than the Light Jib.
Cut: Both sails are made with cross-cut panels with radial patches and designed with the Azure software. Designed by Pedro Gianotti of UK Texas
Material: Light Jib: Dimension Polyant 200HTP Dacron
Medium Jib: Dimension Polyant 205SQHTP Dacron
Features:
- 8oz luff tape stitched with tension allowing perfect luff shape control
- Visibility window
- RBS battens
- Bronze hanks (webbing strap + clip version available)
- Draft stripes
- Roll bag
RUNNER SPINNAKER
The UK Texas J/22 Runner spinnaker was created with very stable shoulders for easy trimming. After a lot of testing, we made improvements to increase speed in all conditions. The AP012 design, with a smaller entry angle proved to be one of the fastest at the course.
Cut: Matrix tri-radial with oriented half section, matching thread lines to load paths. Azure sail design software.
Cloth: Bainbridge AIRX650. (Available colors: Blue, Red, White or any combination of them. For extra colors consult the loft)
Designed by Pedro Gianotti of UK Texas.
